Commercial 3 Compartment Sinks
Set up a complete wash, rinse and sanitize line with stainless steel three compartment sinks.
Brand
Configuration
Drainboards
Drainboard Size
Length (Inches - Left to Right)
Width (Inches - Front to Back)
Height
Compartment Depth
Compartment Front to Back
Compartment Left to Right
Stainless Steel Gauge
Helpful Resources
Best 3 Compartment Sinks for Commercial Kitchens
A three bowl sink gives the dish area one compartment for washing, one for rinsing and one for sanitizing, so soiled water never crosses into clean ware. Straight runs suit most dish rooms, while corner models wrap an inside corner where usable wall is short.
We feature top-quality brands such as Advance Tabco, BlendPort, John Boos, Omcan USA, Sapphire Manufacturing, and Steelworks, and strive to provide the most competitive prices available.
Benefits of Three Compartment Sinks
Separate bowls keep each stage of manual warewashing apart, and drainboards give staff a landing area for soiled ware on one side and drying ware on the other. Bowls are welded stainless steel and the legs land on adjustable bullet feet, so the run levels out on an uneven floor. Keep handwashing off the dish line by pairing it with hand sinks.
What to Look for in Stainless Steel Compartment Sinks
Measure the wall before anything else. Overall lengths run from roughly 35 inches to 165 inches left to right, widths from 19 to 57 inches front to back, and working heights from 42 to 45 inches, which covers a tight bar station and a full production dish room alike. Rooms that cannot give up that much wall can step down to 2 compartment sinks.
- Bowl size and depth: Compartments run 14 to 30 inches front to back, 10 to 30 inches left to right, and 10, 11, 12 or 14 inches deep.
- Drainboards: Drainboard sizes span 10 to 36 inches and mount on one end, on both ends, or are left off entirely.
- Stainless steel gauge: Builds are offered in 14, 16 and 18 gauge, with type 304 stainless steel on many models.
- Backsplash and faucet holes: Faucet holes come punched on 8 inch centers in the backsplash, and faucets are typically sold separately.
- Configuration: Straight runs line one wall, while corner units turn the sink into an inside corner and free straight wall for prep.
Shop 3 Compartment Sinks Today
Compare lengths, bowl depths and drainboard layouts so the sink matches the wall it has to sit against, then finish the bar side of the operation with underbar sinks.