True STR1HRI-1S, Full Size Insulated Roll-in Heated Holding Cabinet, 1 Solid Door, 2 kW

Cabinet Details:

As a part of True's Spec Series, the True STR1HRI-1S reach-in solid swing door heated cabinet features outstanding durability and unbeatable quality.

Crafted using the strongest stainless steel on today's marketplace, the stainless steel front door, front grate & cabinet sides of this unit are defended from some of the toughest damages that could occur in a busy restaurant kitchen, while the interior side walls, back, floor, door liner, & ceiling feature the same stainless steel, leaving it protected from dents and scratches that could occur from taking items inside and out of the unit.

The 1500 watt cabinet comes with one stainless steel heating element that produces uniform electric heat generation and provides holding temperatures between 140°F to 180°F (60°C to 82.2°C) that can be controlled by an exterior on/off switch and electronic temperature control.

The solid positive seal self-closing 120° stay open door features 4 lifetime guaranteed external cam lift door hinges per door section, and comes standard with a lifetime guaranteed bolt style door lock to protect the contents after ours.

Features:

• Cabinet designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control.
• Two (2) stainless steel (for corrosion resistance), finned tube heating elements (1000 watts each) for uniform generation of electric heat. Cabinet comes with a total of 2000 watts.
• Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Fans are controlled by exterior on/off switch.
• Manually controlled vent located on top of the cabinet for positive humidity control.
• Stainless steel breaker caps.
• Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).
• One (1) heavy gauge stainless steel ramp.
• Designed to accept roll-in racks (inboard castors) with a maximum dimension of 27"L x 29"D x 66"H (686 mm x 737 mm x 1677 mm).
• Lifetime guaranteed bolt style door lock standard.
• Lifetime guaranteed heavy duty all metal working door handle.
• Positive seal self-closing door with 120° stay open feature. Lifetime guaranteed external cam lift door hinges, Three (3) per door section.
• Magnetic door gasket of one piece construction, removable without tools for ease of cleaning.
• Incandescent interior lighting; lights activated by exterior on/off switch, safety shielded.
• Exterior digital temperature display, available with either °F or °C .
• Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product.
• Interior bumpers protect cabinet walls from abuse caused by roll-in carts.
• 12" x 20" (305 mm x 508 mm) pan for water included, if additional humidity is required.
• NSF/ANSI Standard 4 compliant for open food product.
• True requires that a sole use circuit be dedicated for the unit.
• Unit completely pre-wired at factory and ready for final connection to a 115/208-240/60 Hz. single phase, 20 amp dedicated outlet. Cord and plug set included.

Product Dimensions:

• Width: 35 Inches
• Depth: 34.75 Inches
• Height: 83.75 Inches

True Warranty:

3 years parts and labor, 5 years on compressor