Master-Bilt DD-66, 69.25" Ice Cream Dipping Cabinet, White
This item is no longer available for purchase.
Recommended for this item
Master-Bilt DD-66 Overview
Features:
- Attractive, contemporary design
- 24 gauge painted textured interior and exterior
- Equipped with leveling legs to correct for non-leveled flooring situations
- Rear air intake and discharge eliminates front grille and allows full front of cabinet for graphics
- Independent on/off compressor and light switch
- Stainless steel top and attached superstructure
- Tempered plate glass viewing window
- Drain with garden hose connector for ease of cleaning
- Brilliant, interior fluorescent lighting
- Stainless steel serving deck
- Top and side lid wiper gaskets
- Heavy-duty epoxy-coated wire can support racks
- 9 ft. long cord with molded plug
- 2.25" foamed-in-place “zero ODP” urethane insulation
- 1 36" Interior light fixture, 1 18" interior light fixture
- Hinged, high-tensile, transparent acrylic dipping compartment lids with full length handle
- Cold wall evaporator
- R-404a refrigerant
- Low maintenance bare tube condenser coil
- No minimum clearance required on cabinet sides but front, back and top must be left open for customer and operator access
- Temperature range: 5° to -5°F (-15° to -21°C)
- R-factor (insulation efficiency rating): 19.40
Product Dimensions:
- Width: 69.25 Inches
- Depth: 27.75 Inches
- Height: 50 Inches
Master-Bilt Warranty:
2 Years Parts & Labor, 3 Year Compressor
Master-Bilt DD-66 Specifications
Dimensions
Width
69.25 Inches
Depth
27.75 Inches
Height
50 Inches
Details
Amps
9.7
Cabinet Type
Merchandising
Can Display Capacity
12 Cans
Cubic Feet
16 cu ft.
Door Style
Swing Door
Door Type
Glass Door
Doors
2
Exterior Color
White
Exterior Color
Black
Exterior Summary
Stainless Steel & Glass
Front Style
Flat
HP
1/2 HP
NSF Listed
Yes
Temperature Range
-5°F to 5°F
Total Container Capacity
20 Cans
Volts
115 Volts
Weight
495 Pounds
Product Condition
New
Warranty
Manufacturer Warranty All items that include a warranty are based on the manufacturer's warranty policy. Purchasers are subject to working directly with the manufacturer to start & finish the warranty process. Note: Some manufacturers' warranties may not cover products when used in a residential setting. To ensure your intended use is covered, please contact us to verify the warranty terms before purchasing.
2 Years Parts & Labor, 3 Year Compressor
