Bizerba GSP HD USPH-VSP-220V, Electric Safety Meat Slicer, 13" Blade, Automatic Gravity Feed Marine Vessel Slicer

The Bizerba GSP HD USPH-VSP-220V has the best blade in the industry. The hardness of its chromium plated blade results in a longer lasting sharp edge that dramatically outlasts the competition. The larger circumference of the blade translated into an extra 4 inches of blade per revolution that passes through the product which reduces overall wear on the blade. You'll get clean and consistent slices every time with the Bizerba GSP HD USPH-VSP-220V and with an adjustable thickness of 0.01" - 0.94" you can produces the thinnest most delicate slices of meat. The GSP H meat slicer was designed with safety in mind so that it can be used even on seafaring vessels.

Features:

• USPH Standard for Vessel Sanitation Program - 2011 Construction Guidelines
• Marine Fasteners, low profile, non-slotted, non-corroding easy to clean fasteners on food-contact surfaces and in splash zones
• Energy Efficiency: 1/2 H.P. motor, 319 r.p.m.
• Marine Vessel Voltage: 220 Volt / 60Hz / 1-Phase, 6' foot cord, Euro power plug
• Variable 3-Speed automatic drive system
• 3 Stroke lengths, easily adapts to a changing menu
• Emotion intelligent motor control, 255 rpm motor adapts its performance to the resistance of the product
• Operating time, designed for permanent operation
• Unique carriage-shifting design allows for the smallest end pieces, increased product yield
• Widest product carriage for increased capacity
• Heavy-duty, 3 lb. blade knife cover, durable
• 60-62 Rockwell hardness at the edge of blade
• Debris deflector, permanently mounted, included
• Precision machined pencil-point-groves on gauge plate, blade cover and carriage to reduce friction, produce better looking product
• Safety Interlock: No-volt release. Adjustable blade shut off settings: 15, 30, 45 seconds or off. Shut off in slice thickness knob. Carriage and gauge plate lock during the cleaning process. Forced start with slice thickness knob below zero
• Illuminated index slicing dial, at-a-glance machine status:
• Green push-handle on carriage, safe slicing
• Red remnant-lift arm handle, reminds operator to use caution
• 3.5"W (90mm) x 9.13"H x 2.6"D thumb guard wall for maximum protection
• 360° blade enclosure, no top-gaps in blade ring-guard
• Zero blade exposure during the cleaning process
• Front mounted controls
• Rear mounted lift arm with largest and easiest to use remnant holder with 306 holding points, removable for cleaning, dish-machine safe
• The ability to adjust both the speed and the stroke of the carriage on the fly will speed up your operation
• Servo motor provides assistance to operator by decreasing slicing effort which reduced operator fatigue during manual slicing mode
• Low profile carriage for easy loading of heavy product
• Side lift arm for easy cleaning under slicer
• Recommended 31.25" - above floor height
• Certified to the new NSF/ANSI Standard 8-2017
• One piece anodized aluminum construction
• Non-removable carriage system for faster cleaning and sanitizing
• Double-sided seal between blade knife and housing, no gap for food to collect, better hygiene
• UL157 dairy grade seals and gaskets used to seal against water and food debris, no silicone used under seals, better hygiene
• Liquid and debris diversion from all control surfaces
• Remote blade sharpener does not collect food debris during operation and is dishwasher safe for improved safety and hygiene
• One piece carriage with seamless thumb guard for highest hygiene standards, no slotted-screw heads on thumb guard
• Remote blade sharpener does not collect food debris during operation and is dishwasher safe for improved safety and hygiene

Product Dimensions:

• Width: 28.54 Inches
• Depth: 22.48 Inches
• Height: 24.67 Inches

Bizerba Warranty:

1 Year Parts & Labor