Bizerba GSP H USPH-VSP-220V, Electric Safety Meat Slicer, 13" Blade, Manual Gravity Feed Marine Vessel Slicer

The Bizerba GSP H USPH-VSP-220V has the best blade in the industry. The hardness of its chromium plated blade results in a longer lasting sharp edge that dramatically outlasts the competition. The larger circumference of the blade translated into an extra 4 inches of blade per revolution that passes through the product which reduces overall wear on the blade. You'll get clean and consistent slices every time with the Bizerba GSP H USPH-VSP-220V and with an adjustable thickness of 0.01" - 0.94" you can produces the thinnest most delicate slices of meat. The GSP H meat slicer was designed with safety in mind so that it can be used even on seafaring vessels.

Features:

• USPH Standard for Vessel Sanitation Program - 2011 Construction Guidelines
• Marine Fasteners, low profile, non-slotted, non-corroding easy to clean fasteners on food-contact surfaces and in splash zones
• Energy Efficiency: 1/2 H.P. motor, 319 r.p.m.
• Marine Vessel Voltage: 220Volt / 60Hz / 1-Phase, 6' foot cord, Euro power plug
• Operating time, designed for permanent operation
• Unique carriage-shifting design allows for the smallest end pieces, increased product yield
• Widest product carriage for increased capacity
• Heavy-duty, 3 lb. blade knife cover, durable
• 60-62 Rockwell hardness at the edge of blade
• Debris deflector, permanently mounted, included
• Precision machined pencil-point-groves on gauge plate, blade cover and carriage to reduce friction, produce better looking product
• Safety Interlock: No-volt release. Adjustable blade shut off settings: 15, 30, 45 seconds or off. Shut off in slice thickness knob. Carriage and gauge plate lock during the cleaning process. Forced start with slice thickness knob below zero
• Illuminated index slicing dial, at-a-glance machine status:
• Green push-handle on carriage, safe slicing
• Red remnant-lift arm handle, reminds operator to use caution
• 3.5"W (90mm) x 9.13"H x 2.6"D thumb guard wall for maximum protection
• 360° blade enclosure, no top-gaps in blade ring-guard
• Zero blade exposure during the cleaning process
• Front mounted controls
• Rear mounted lift arm with largest and easiest to use remnant holder with 306 holding points, removable for cleaning, dish-machine safe
• Low profile carriage for easy loading of heavy product
• Side lift arm for easy cleaning under slicer
• Recommended 31.25" - above floor height
• Certified to the new NSF/ANSI Standard 8-2017
• One piece anodized aluminum construction
• Non-removable carriage system for faster cleaning and sanitizing
• Double-sided seal between blade knife and housing, no gap for food to collect, better hygiene
• UL157 dairy grade seals and gaskets used to seal against water and food debris, no silicone used under seals, better hygiene
• Liquid and debris diversion from all control surfaces
• One piece carriage with seamless thumb guard for highest hygiene standards, no slotted-screw heads on thumb guard
• Remote blade sharpener does not collect food debris during operation and is dishwasher safe for improved safety and hygiene

Product Dimensions:

• Width: 28.54 Inches
• Depth: 23.07 Inches
• Height: 23.46 Inches

Bizerba Warranty:

1 Year Parts & Labor