Metro MBQ-200D-QH, 67" x 33" Stainless Steel Heated Banquet Cart w/ 4 Shelves

Benefits:

• The Metro MBQ-200D-QH heated banquet cart puts you in control of time, temperature, and taste.
• Two-door versions offer the greatest accessibility to the contents of the cabinet. Designed to hold 11 3/4" (up to 12 3/4") diameter covered plates. Also holds full-size sheet pans front-to-back on shelves or in optional Mini Rack slide system.
• Versatile Thermal Performance: Standard Electric and Quad- Heat™ Dual Fuel thermal systems available.
• Superior Thermal Stratification: Available Quad-Heat™ Dual Fuel canned fuel system utilizes corner chimneys to provide even thermal stratification, channeling warm air throughout the cabinet, surrounding meals with uniform heat. By utilizing the “dead” space in the corners, Quad-Heat™ maximizes the volume of the cabinet while minimizing the space it requires. Easy-to-access drawers allow canned fuel to be monitored and replaced without opening doors.
• Control: Three-Point-Control Handle is designed with the user in mind. Ergonomically designed for pushing and pulling from both the side and the front. Optional Swing-Up Handle provides additional control and visibility when moving the cabinet.
• Hands-Free Access: Kick-Latch provides access to the cabinet when hands are full.
• Removable Module: High-performance 1.65 kW heating module is easy to remove, without tools, for scheduled cleaning and service. Side-mounted power cord is easy-to-access and does not obstruct doors.
• Accomodate up to (200) 11 3/4" or (160) 12 3/4" covered plates (diameter of cover) and full-size sheet pans front-to-back on shelves.

Features:

• Construction: Welded, reinforced, stainless steel “edgeless” construction.
• Cabinet Materials: Type 304 stainless steel; 20-gauge polished exterior; 22-gauge interior.
• Casters: Heavy-duty, 6" diameter polyurethane casters with 2" tread width. Ball bearing swivel race and roller bearing axle with zerk grease fittings. Plate-mounted and staggered. Two rigid and two swivel with brakes.
• Bumper: Non-marking, solid vinyl bumper mounted to 1/8" thick aluminum support channel.
• Insulation: Full, 1" thick high-density fiberglass. R Value=4.2.
• Doors: Insulated, welded, double-panel Type 304 stainless steel door; 20-gauge polished exterior; 22-gauge interior.
• Hinges: Lift-off, double hinged, with long-life nylon bearings.
• Gaskets: High temperature, cabinet-mounted, santoprene gaskets.
• Latches: High-strength magnetic pull latch and bottom mounted kick latch on door.
• Handle: Unique Three-Point-Control Handle. 1" diameter stainless steel construction with integral cord wrap standoffs.
• Shelves: 59" x 24" nickel-chrome plated, removable wire shelves. Heavy duty, non-flattening shelf brackets.
• Thermometer: Easy-to-read analog thermometer with remote protected sensing bulb.
• Timer: Dual-function count-up and count-down timer.
• Content Labeling: Multi-function white-board/clipboard for use with dry-erase marker or any size paper label.
• Electric Heating System: Bottom, mounted heat module. Dial thermostatic control. High-temperature ball bearing blower motor. 1.65 kW, 120 VAC, 13.8 amp, 15 ft., 3-wire lead cord with NEMA 5-15P plug (20 amp for CUL). Removable without tools.
• Thermal Performance: Electric pre-heat to 170° F (76° C), actual internal temperature, in approximately 30 minutes (based on 120 capacity size).

Product Dimensions:

• Width: 67.25 Inches
• Depth: 33.4 Inches
• Height: 75 Inches