Crown EC-2, 2 Compartment Freestanding Electric Pressure Steamer w/ 36" Cabinet Base, 24 kW

Features:

• The cooker shall be constructed of all-welded satin finish stainless steel, type 304.
• The doors shall have a removable inner liner of aluminum plate with full perimeter gasket seal, an outer liner of one-piece all-welded stainless steel, and a wheel-and-screw closing mechanism.
• The doors, with a clear opening of 10-1/4” x 26-3/8”, shall latch upon closing and shall open 15° upon latch release.
• Compartment operation shall be at a maximum pressure of 6 psi (41kPa).
• The control housing shall be constructed of stainless steel with a full-access removable panel.
• Automatic timer controls with visible and audible signals. At the end of the cooking cycle, the controls automatically shut off and exhaust the incoming steam, drain the condensate from the compartment, and sound a continuous signal until turned off manually.
• Each cooking compartment shall have either removable shelf supports with one slide-out shelf (second shelf optional) or removable universal pan supports. The capacities shall range as follows: Shelf supports: Four full size (1/1 gastronorm) pans, 2-1/2” or 4” (64mm or 100mm) deep. Universal supports: Eight full size (1/1 gastronorm) pans, 2-1/2” (64mm or 100mm) deep, or four full size (1/1 gastronorm) pans, 4” (100mm) deep.
• The compartment cooker shall be mounted on a cabinet base with full perimeter angle frame, reinforced counter and boiler mountings, electric boiler with controls which shall include the following as standard, automatic water level control, pressure gauge, water gauge glass, pressure control with secondary safety pressure control, air vent, safety relief valve and cathodic descaler.
• Thermostatically controlled cold water shall automatically condensate exhausted steam into water before releasing it to the drain.
• The cabinet shall be all stainless steel #4 finish type 304, hinged doors and 6” (152mm) stainless steel legs fitted with adjustable bullet feet on the front and flanged on the rear.

Product Dimensions:

• Width: 36 Inches
• Depth: 33.88 Inches
• Height: 55 Inches

Crown Warranty:

1 Year Parts & Labor